Chipset Info

• 1.7GHz NVIDIA Tegra 4 SoC

• SK Hynix H26M64003DQR 32GB NAND Flash

• Atmel AT32UC3L0256 32-bit AVR UC3 RISC microcontroller

• 324 D81 EW

• Micron Technology 2GB DDR3 SDRAM (3NE77 D9GLJ QLV5)

• Texas Instruments TPS65913 processor power management unit (PMU)

• Texas Instruments TPS 650

• Marvell Avastar 88W8797 Integrated 2x2 WLAN/Bluetooth/FM Single-Chip SoC

• Multiple RF Micro Devices ICs

• Wolfson Micro WM8962BE Audio Codec

• Atmel maXTouch mXT1664S capacitive touchscreen controller

• Texas Instruments MSP430 ultra-low-power microcontroller

• ZUF 37K CDYF

• 7.6V 31.3WH Li-ion battery

• 3.5-megapixel front-facing camera

• 5.0-megapixel rear-facing camera

ACPI Dump for RT2.

What is a DSDT

DSDT (Differentiated System Description Table) is a part of the ACPI specification. It supplies information about supported power events in a given system. ACPI tables are provided in firmware from the manufacturer.

Ours are compiled with the Microsoft compiler. RT2 location: Address : 0xFDEFD000 Length : 15469 (NVIDIA T114EDK2)

Further reading:

RT2 DSDT Source

BCT Table for SurfaceRT2

[To be dumped still]

Reference:

See notes at https://github.com/NVIDIA/cbootimage-configs

Surface RT2 lsefisystab (efi system tables)

TBD - [someone with an RT2 needs to boot into an EFI shell and run lsefimmap]

The Surface 2 was launched in 2013, being a follow-up to Surface RT with spec bump and improvements. Featuring faster internals and higher resolution panel with better colour reproduction.

https://support.microsoft.com/en-gb/surface/surface-2-specifications-7a5aaf4f-9641-2c69-3747-ea4e2a161aae